碳纳米管(CNTs)在树脂应用中容易发生缠结和团聚,大大降低了其在树脂基复合材料中作为增强材料的应用效果,因此,CNTs在树脂基复合材料中分散度的表征是研究和改善其分散性能的重要基础。引入一种基于Image J软件分析的CNTs/树脂基复合材料的光学显微分析方法模型,使用3D MAX对不同厚度CNTs/树脂基复合材料进行模拟。此外,还以不同质量比的CNTs/聚苯乙烯-聚(2-乙烯基吡啶)(CNTs/PS-b-P2VP)复合材料样品作为实例,并使用引入的分析方法模型对CNTs的分散度计算,结果表明当PS-b-P2VP含量增加时,CNTs分散度得到明显提升,说明该模型方法符合实际分析结果。
Carbon nanotubes (CNTs) are prone to entanglement and agglomeration during the application process which significantly hinders their application effects as reinforced material.Consequently,the characterization of CNTs' dispersion in polymer matrix is an essential basement to investigate and improve their dispersion.An optical microscopic analysis model of CNTs/polymer composite based on Image J was introduced.Furthermore,3D MAX was used to simulate CNTs/polymer composites with different thicknesses.In addition,CNTs/polystyrene poly (2-vinylpyridine) (PS-b-P2VP) composites with different mass ratios were prepared and taken as examples,and the dispersion of CNTs was calculated using the introduced analytical method model.The result demonstrated that as the content of PS-b-P2VP increased,the dispersion of CNTs significantly improved,indicating that the model method was in line with the actual analysis results.
[1] Dresselhaus M S,Dresselhaus G,Saito R.Physics of carbon nanotubes[J].Carbon,1995,33(7):883-891.
[2] Yao Zhenhua,Zhu Changchun,Cheng Min,et al.Mechanical properties of carbon nanotube by molecular dynamics simulation[J].Computational Materials Science,2001,22(3-4):180-184.
[3] Behera Rohit Pratyush,Rawat Prashant,Tiwari Santosh Kumar,et al.A brief review on the mechanical properties of carbon nanotube reinforced polymer composites[J].Materials Today:Proceedings,2020,22:2109-2117.
[4] Ma Pengcheng,Naveed A Siddiqui,Gad Marom,et al.Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites:a review[J].Composites:Part A,2010,41:1345-1367.
[5] Chen Junjie,Han Jiecheng.Effect of hydroxylated carbon nanotubes on the thermal and electrical properties of derived epoxy composite materials[J].Results in Physics,2020,18:103246.
[6] Wang Z L,Gao R P,Poncharal P,et al.Mechanical and electrostatic properties of carbon nanotubes and nanowires[J].Materials Science and Engineering C,2001,16(1-2):3-10.
[7] Yang Fan,Qian Shunzhi.Mechanical and piezoelectric properties of ECC with CNT incorporated through fiber modification[J].Construction and Building Materials,2020,260:119717.
[8] Prashant Tripathi,Ashish Bhatnagar,Ramesh A,et al.Radially aligned CNTs derived carbon hollow cylinder architecture for efficient energy storage[J].Electrochimica Acta,2020,354:136650.
[9] 贾琨,李克训,张泽奎,等.石墨烯／碳纳米管复合材料的微波吸收性能研究[J].功能材料,2018,49(2):02136-02140.
[10] 秦文峰,符佳伟,王新远,等.多壁碳纳米管导电纸/碳纤维复合材料的制备及电磁屏蔽性能研究[J].化工新型材料,2020,48(9):68-71.
[11] 王惠芳,刘刚,曹康丽,等.碳纳米管材料在航天器上的应用研究现状及展望[J].材料导报,2019,33(Z1):78-83.
[12] 李志刚,王洁.MWCNTs-PEG/HFS复合相变材料的制备及其对水泥板热性能的影响[J].化工新型材料,2020,48(8):75-79.
[13] Buschhorn S T,Wichmann M H G,Sumfleth J,et al.Charakterisierung der dispersionsgüte von carbon nanotubes in polymer-nanokompositen[J].Chemie Ingenieur Technik.2011,83(6):767-781.
[14] Lan Yuecui,Rong Changzeng,Shao Kangguan,et al.Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys:the influence of porosity[J].Journal of Alloys and Compounds,2017,695:2464-2476.
[15] Blawert C,Heitmann V,Dietzel W,et al.Influence of electrolyte on corrosion properties of plasma electrolytic conversion coated magnesium alloys[J].Surface and Coatings Technology,2007,201:8709-8714.
基金资助
国家自然科学基金青年项目(51701148);大学生创新创业训练项目(S202011736018)
PDF
